Hello, So I wanted to write this post to help those of you that are new to embroidery get a brief overview of some of the techniques, tools or terms that you may hear in your quest to learn more about embroidery. What I’ve come up […]
Tag: crewel work embroidery
So what do you do with a piece once you have finished working it? Well there are a variety of options and today we will be looking at how to mount the piece ready for framing. For many people they do not enjoy this process […]
Raised Chain Band is a lovely stitch that gives a great texture to your embroidery. It is often used for stems in Crewel embroidery. For this example I have worked one band down the centre of the ladder, however you could fill the ladder with several bands so that none of the ladder is visible.
Begin by bringing your needle up on the left hand side at the base of your stem or line that you would like to fill with Raised Chain Band, making sure that you leave 2mm from the very base.
Take a stitch down on the line, on the opposite side, keeping the stitch at 90 degrees with the two drawn lines. Bring your needle 2-3mm above your first stitch and up on the same side that you just took your needle down.
Take your needle down on the left hand side, making sure your stitches are neat. By bringing your needle up on the same side as you have just taken it down, it helps to reduce any bulky stitching on the back. Continue working up the stem. You will notice that the angle of the ladder stitches turns with the drawn lines you are following. This will give you a nice flowing raised chain band.
Your ladder stitches should look like this when you have reached the top of your line.
I choose to work the ladder and chain band in two separate colours, the lighter being used for the chain band, but you could use the same colour if you wish. With a new needle and thread secured into the fabric, take your needle up, slightly further away from the last ladder stitch and in the centre of the ladder.
Take your needle over and back under the first bar so that your needle is pointing towards the top of your design, leaving the thread to the right.
Pull the thread tight so that it doesn’t loop but not so tight that it distorts the position of the bar.
Take your needle back under the first bar, with your needle facing towards the bottom of the design. You will be creating a loop and you must make sure your needle sits on top of the loop.
Again pull the thread tight so you form a nice chain shape over the bar, not too tight that it distorts the bar underneath.
Bring your needle, over and under the second bar with your needle pointing towards the top of your design, just as you did in step 6.
Take you needle under the second bar to the right of stitch you just made. You will be forming a loop and you must remember to take your needle over the top and through the loop, just the same as step 7.
Continue working down the stem, repeating steps 9 and 10 until you reach the bottom of your stem. You can then take your needle down through the fabric at the base of the stem to finish your stitches off. Your finished Raised Chain Band should look like the image below.
I hope you have found this tutorial useful. Please feel free to leave any comments or feedback.
Stem stitch is often used for outlining shapes that have previously been filled with another stitch or as a single stand alone line. For this video I am working in Appletons wool on a Linen Twill. The design I am working is for a Jacobean Crewel work embroidery […]
No style of embroidery is ever solely distinctive of one time in history or one century. Through evolution of design, there is always a correlation between styles that results in gradual changes of taste and a combination of influences. Designs are very rarely original, instead […]
Heavy chain stitch is one of the many variations of chain stitch. It produces a solid heavy stitch, a bit like a braid which is perfect for outlining densely stitched shapes that need the definition. It is worked in the opposite direction from regular chain stitch.
Begin by bringing your needle up at the start of the line you wish to work. Take a small stitch about 2mm down along the line.
Bring your needle up along the line, 2mm below your previous stitch.
Using the eye of your needle or a tapestry needle, take it underneath the first stitch you made. Be careful not to catch any fibres from the first stitch.
Take your needle back down into the same hole that you brought your needle up in.
Bring your needle up about 2mm below the stitch you have just created. Take your needle through the very small stitch you first made. You should now have two stitches going through that first stitch.
Again take your needle down in the same hole that you brought your needle up in.
Bring your needle up again, on the line 2mm below your previous stitch. Take your needle through the stitch you created in step 6.
Make sure you do not take your needle through your previous stitch as shown in the image below, otherwise you will end up with a normal looking chain stitch.
Continue to work your stitches following the above step. Remember to always take your needle through the second from last stitch that you worked.
Once you reach the end of the line you can take the stitch down in the same way as before and finish your thread.
And here is what your completed heavy chain stitch should look like.
I hope this post helps and you found the information useful. As always, please feel free to comment with any questions!